Toyota Super SP200 Series Instruction Manual page 33

Thread cutter
For model XXX26C/XXX34C
Line up the two threads, and cut
them with the thread cutter on the
presser bar.
For model XXX26D/34D/SuperJ26/34
Line up the two threads, and cut
them with the thread cutter on the
face cover.
Reverse sewing
Reverse sewing is performed at the beginning and the end of sewing to prevent the
thread from unraveling.
Reverse sewing is performed while
pressing down the reverse sewing
lever.
Stitch 1 cm (0.4 inch) from the edge
of the fabric to prevent unraveling at
the start of sewing.
Sew 3 to 4 reverse stitches at the
end of sewing.
Note:
Remove your finger from the
reverse sewing lever to return to
forward sewing.
Thread cutter
Thread cutter
Reverse sewing
lever
EN
4
33