Toyota Super SP200 Series Instruction Manual page 19

Turn the handwheel toward
yourself to raise the take-up
lever.
Handwheel
Take-up lever
Spool pin (
Handwheel (
Main power switch
(
Pull the thread
down along the
groove, and then
pull it back up.
Pass the thread
through the take-
up lever from the
right.
Pull the thread
down along the
groove.
)
)
)
Check that the Pass the thread in
take-up lever the order shown.
is correctly (
threaded.
Take-up
lever
Pull up the spool pin.
Position the spool of
thread and place the spool
cap on to the spool pin.
Spool cap
Spool of thread
Felt
Spool pin
Pull the thread from
the thread spool, and
hold it with one hand.
Pass the thread
around the thread
guide with the other
hand, as shown.
Thread guide
The thread
should be taut
through ) and secure.
EN
3
19