Toyota Super SP200 Series Instruction Manual page 45

Position the fabric so that the needle slightly catches the fold.
Zigzag sewing foot
Needle on
the left side
When using the zigzag sewing foot
Lower the presser foot, and start sewing.
The part of the stitch that catches the fold
will be visible from the right side of the
fabric. Sew evenly so that the stitching is
not too large or too small.
When using the blind stitch foot
Lower the presser foot, adjust the screw
so that the fold aligns with the guide, and
then sew with the fold against the guide.
After sewing, pull out the tacking, and fold out the fabric.
Balanced stitches
Small stitches evenly
located on outer side.
Inner Outer
side side
(When unfolded)
Fold
Needle on
the left side
Troubleshooting
Needle catches too
much on the fold
Inner Outer
side side
Large stitches on outer side.
Blind stitch foot
Fold
Inner
side
Guide
Needle does not
catch on the fold
Inner
side
The blind hem stitches
do not come through
EN
Fold
4
Adjusting
screw
Fold
Outer
side
45