Toyota Super SP200 Series Instruction Manual page 25

WARNING
Do not turn the pattern selection dial while the needle is lowered.
Doing so could break the needle and cause an injury.
When sewing patterns L to S
Stitches L through S can be sewn only with model XXX34C/34D/SuperJ34
Turn the dial until the desired
pattern aligns with the mark
above the dial.
Turn the stitch length dial
until aligns with the
mark above the dial.
The stitch length is fixed at 3 mm
(0.14 inch) and cannot be adjusted.
Pattern
selection Application
dial No.
L
Decorative stitch
M
Decorative stitch
N
Fagoting
O
Appliqué
P
Appliqué
Q
Decorative stitch
Pattern
selection
dial
Stitch length
dial
Presser foot
(recommended
setting)
Zigzag sewing
foot
Mark above dial
Stitch length dial
Pattern
selection Application
dial No.
R
Decorative stitch
S
Decorative stitch
Mark above dial
Turn to the left
Stitch length
dial
Presser foot
(recommended
setting)
Zigzag sewing
foot
25
EN
3