Support the thread on the sewing
machine with one hand, using the other
hand to pass the thread around the
thread guide as shown in the diagram.
Pass the thread along the groove of the
thread guide plate.
Turn the handwheel towards you until
the take-up lever appears.
Pass the thread through the take-up
lever.
Set the right-side thread on the needle
clamp and pass it through the right
needle eye. Set the left-side thread on
the left side of the needle guide, and
pass it through the left needle eye, as
shown in the diagram.
Note:
A needle threader can not be used for twin needle threading.
Thread guide
Take-up lever
Needle guide
EN
4
Needle
clamp
53