Recommended Care And Cleaning - Crestron MT-1000C Operation Manual

MiniTouch Handheld Wireless Touchpanel
14 • MiniTouch Handheld Wireless Touchpanel: MT-1000C
Exit
The Exit button returns the MT-1000C to normal operation.

Recommended Care and Cleaning

Keep the surface of the touchscreen free of dirt, dust or other materials that could
degrade optical properties. Long-term contact with abrasive materials can scratch the
surface, which may detrimentally affect image quality.
•
To avoid scratching the touchscreen, do not use a pen, pencil, or any sharp
object. Use a plastic pen top, PDA stylus, or your finger.
•
The MT-1000C is not waterproof. Avoid using it in damp or wet locations.
•
Keep the MT-1000C away from extreme heat or cold.
•
The touchscreen contains a glass element; avoid dropping or impacting
against anything.
•
If water is spilled on the MT-1000C, remove the battery pack and allow the
MT-1000C to dry for 48 hours before using.
For best cleaning results use a clean, damp, non-abrasive cloth with any
commercially available non-ammonia glass cleaner. Bezels may not provide a
complete watertight seal. Therefore, apply cleaning solution to the cloth rather than
the surface of the touchscreen. Wipe touchscreen clean and avoid getting moisture
beneath the bezels.
Crestron MT-1000C
Operations Guide - DOC. 6322A