Programming Software; Earliest Version Software Requirements For The Pc; Programming With Crestron Systembuilder; Programming With Simpl Windows - Crestron MT-1000C Operation Manual

Crestron MT-1000C

Programming Software

Configuration Manager
Operations Guide – DOC. 6322A
MiniTouch Handheld Wireless Touchpanel
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron website. To post a question or view questions you have
submitted to Crestron's True Blue Support, log in at http://support.crestron.com.
First-time users will need to establish a user account.

Earliest Version Software Requirements for the PC

NOTE: Crestron recommends that you use the latest software to take advantage of
the most recently released features. The latest software is available from the Crestron
website.
Crestron has developed an assortment of Windows
a Cresnet system. For the minimum recommended software versions, visit the
Version Tracker page of the Crestron website (www.crestron.com/versiontracker).

Programming with Crestron SystemBuilder

Crestron SystemBuilder is the easiest method of programming but does not offer as
much flexibility as SIMPL Windows. For additional details, download
SystemBuilder from the Crestron website and examine the extensive help file.

Programming with SIMPL Windows

NOTE: While SIMPL Windows can be used to program the MT-1000C, it is
recommended to use SystemBuilder for configuring a system.
SIMPL Windows is Crestron's premier software for programming Crestron control
systems. It is organized into two separate but equally important "Managers".
Configuration Manager is the view where programmers "build" a Crestron control
system by selecting hardware from the Device Library.
The MT-1000C can be programmed to operate either as an RF device or as an IR
device. Either configuration requires that the MT-1000C communicate via a gateway
device: a C2N-IRGW Series for IR; a CNRFGWA-418 for RF, or via a control
system such as the M2CW that has built-in gateways for both RF and IR. The total
number of MT-1000Cs that can be incorporated into a given system depends on the
number and properties of the specific gateway(s) selected.
The following procedures are based on using an M2CW control system.
•
To incorporate the MT-1000C into the system, drag the appropriate
MT-1000C from the Touchpanels | Touchpanels (Wireless One-Way) folder
of the Device Library and drop it in the System Views.
•
Both instances of the MT-1000C are shown in the Device Library. Select
either one or both, as appropriate.
MiniTouch Handheld Wireless Touchpanel: MT-1000C • 15

-based software tools to develop