Selecting A Region - Sony MLS-X1 User Manual

Device 4 > Device 5 > Device 6 > Device 7 > Device 8 >
Device 9 > Device 10 > Device 11 > Device 12 > P-Bus
> GPI > Macro > Router

Selecting a Region

When selecting the target region in the menus for effect
timelines and snapshots, the region selection window
appears.
Notes
• The display of the region selection window varies
depending on the menu.
• An effect timeline/snapshot region or other region can
be selected using the numeric keypad control block.
For details, see "Selecting a region" (page 255).
Region display section
Region selection buttons
When separate pages are displayed for each type of
region, select a tab to switch the display.
To select a region, press the target region selection button,
turning it on. A blue bar is displayed across the bottom of
the button.
To cancel a selection, press the target region selection
button, turning it off.
To select all regions
You can press the [All Regions] button to select all
regions configured beforehand at the same time.
If you press the [All Regions] button while none of the
configured target regions are selected, then the target
regions are selected at the same time and all other regions
are deselected.
If you press the [All Regions] button while at least one of
the configured target regions is selected, all regions are
deselected.
For details about setting the regions selected
simultaneously, see "Setting Regions Selected
Simultaneously" (page 402).
All Regions button
80
Region display section
The region display section shows the region selection
status.
• Selected region: White text
• Deselected region: Gray text
• Reference region: Highlighted display