a) Displays the default button name. When the assignment is changed, the
changed button name is displayed in parentheses after the button name.
b) Indicates a button without an assigned function.
Note
A macro attachment cannot be configured when the
following buttons are assigned.
[NORM] button, [NORM/REV] button, [REV] button,
[PRIOR SET] button, [LIMIT SET] button, [TRANS
PVW] button, [KF] button, [MAIN] button, [SUB]
button, and buttons without an assigned function
Block: M/E-1 to M/E-5 Trans, P/P Trans
(ICP-X1000 series transition control block)
Button1
Button2
(blank)
KEY1 to KEY8
Sub
BKGD
Main&Sub
PRIOR SET
FM1&2 CLIP
PST COLOR MIX
MIX
WIPE
DME WIPE
AUTO TRANS
CUT
Fader
KEY1 to KEY8
AUTO TRANS
Sub KEY1 to Sub KEY8
Main&Sub KEY1 to
Main&Sub KEY8
a) Displays the default button name. When the assignment is changed, the
changed button name is displayed in parentheses after the button name.
b) Displays the [KEY1 TRANS] button to [KEY8 TRANS] button.
Note
A macro attachment cannot be configured when the
following buttons are assigned.
[NORM] button, [NORM/REV] button, [REV] button,
[PRIOR SET] button, [LIMIT SET] button, [TRANS
PVW] button, [MAIN] button, [SUB] button, and buttons
without an assigned function
Block: M/E-1 to M/E-5 Trans, P/P Trans
(simple-type transition control block)
Button1
(blank)
Sub
Main&Sub
a) Displays the default button name. When the assignment is changed, the
changed button name is displayed in parentheses after the button name.
Button3
a)
–
a)
a)
a)
a)
a)
a)
a)
a) b)
Button2
Button3
a)
MIX
–
a)
NAM
a)
WIPE
a)
DME WIPE
a)
TAKE
a)
PTN LIMIT
a)
LIMIT SET
a)
NORM/REV
a)
REV
Fader
Note
A macro attachment cannot be configured when the
following buttons are assigned.
[NORM/REV] button, [REV] button, [MCRO TAKE]
button, [LIMIT SET] button, [KF] button, [MAIN]
button, [SUB] button, and buttons without an assigned
function
Block: M/E-1 to M/E-5 Key Trans, P/P Key Trans
(independent key transition control block)
a)
Button1
KEY1 to KEY8
M/Ex KEY1 to M/Ex KEY8
P/P KEY1 to P/P KEY8
Sub KEY1 to Sub KEY8
Sub M/Ex KEY1 to Sub
M/Ex KEY8
Sub P/P KEY1 to Sub P/P
KEY8
Main&Sub KEY1 to
Main&Sub KEY8
Main&Sub M/Ex KEY1 to
Main&Sub M/Ex KEY8
Main&Sub P/P KEY1 to
Main&Sub P/P KEY8
a) "M/Ex" = M/E1 to M/E5
b) Displays the default button name. When the assignment is changed, the
changed button name is displayed in parentheses after the button name.
526
Button2
Button3
b)
KEY ON
–
b)
AUTO TRANS