Transition Control Block (Simple Type) - Sony MLS-X1 User Manual

d Independent key transition execution section
Display
Independent key transition execution buttons
Independent key transition execution buttons
(assignable buttons)
You can assign execution buttons for independent key
transitions in the Home > Setup > Panel > Module >
Button Assign menu (19104.21).
For details about assigning buttons, see "Assigning
Control Panel Buttons" (page 402).

Transition Control Block (Simple Type)

The simple-type transition control block is used to
execute background transitions.
For details, see "Chapter 5 Transitions" (page 94).
Function Button
name name
Key 1 KEY1 ON
Transition to KEY8
to Key 8 ON
Transition
AUTO
TRANS
Note
The [KEYx ON] button (x = 1 to 8) and the [AUTO
TRANS] button for the same key are assigned as a set.
Display
Displays the following information for each key assigned
to an independent key transition execution button.
• Key content name (key source name when a key source
is selected on a cross-point control block key bus)
• Currently used DME channel or resizer
• Transition rate
• Transition type
For details about the content name display of keys, see
"Setting Logical V/K Pair Names/Source Names and
Destination Names" (page 416) and "Setting a Logical
V/K Pair" (page 381).
a
b
a
27
Description
Inserts or removes a key
instantaneously.
If a key is currently inserted, the
button is lit amber.
Inserts or removes a key
automatically with the set
transition rate and transition type.
During the transition, the button
is lit amber.
a
c