Sony MLS-X1 User Manual page 316

5
Press the button for the target symbol to set.
Select a tab to change the event to display.
[A to I] tab: Symbols whose name starts with A to I
[J to R] tab: Symbols whose name starts with J to R
[S to Z] tab: Symbols whose name starts with S to Z
Note
When inserting "Continue," only the symbol that is
the same as the event at the selected insertion position
can be set.
6
Press [OK].
The required parameter buttons for the selected
symbol are added to the [Symbol/Parameter] group in
the [Add New Event] window.
7
Set the parameters.
When a parameter button is pressed, select/enter a
parameter setting value using a selection window,
numeric keypad window, or the keyboard.
8
Press [OK] in the [Add New Event] window.
When auto insert mode is enabled, the event is
inserted after the selected event automatically.
When auto insert mode is disabled, press the [Event –
Insert After] button to insert the event.
Note
You can insert before or after the selected event using
the [Insert Before] button or [Insert After] button in
the [Edit Macro Event] window.
To insert a control panel operation event
1
In the event list, select the event at the insertion
position.
2
Perform a control panel operation to register as an
event.
When auto insert mode is enabled, the control panel
operation is inserted as an event after the selected
event automatically.
When auto insert mode is disabled, press the [Event -
Insert After] button to insert the control panel
operation as an event.
Note
You can insert before or after the selected event using
the [Insert Before] button or [Insert After] button in
the [Edit Macro Event] window.
To insert a menu operation event
1
In the event list, select the event at the insertion
position.
2
Perform a menu operation to register as an event.
When auto insert mode is enabled, the menu
operation is inserted as an event after the selected
event automatically.
When auto insert mode is disabled, press the [Event -
Insert After] button to insert the menu operation as an
event.
Note
You can insert before or after the selected event using
the [Insert Before] button or [Insert After] button in
the [Edit Macro Event] window.
Inserting a pause event
For details about pause events, see "Pause event"
(page 305).
1
In the event list, select the event at the insertion
position.
2
Press the [Pause] button in the [Edit] group and enter
a pause time in the numeric keypad window.
Note
You can also set this using the [Pause] button in the
[Edit Macro Event] window. Enter a pause time in the
numeric keypad area.
3
Press [Enter].
When auto insert mode is enabled, the pause event is
inserted after the selected event automatically.
When auto insert mode is disabled, press the [Event -
Insert After] button to insert the pause event.
Note
You can insert before or after the selected event using
the [Insert Before] button or [Insert After] button in
the [Edit Macro Event] window.
Modifying an event
Note
Menu operation events cannot be modified.
1
In the event list, select the target event to modify.
316