Snapshot Operations In The Menus; Selecting A Region Or Reference Region In A Menu; Setting Snapshot Attributes - Sony MVS-8000X User Manual

Snapshot Operations in the Menus

Operations in the Snapshot menu
You can also set snapshot or key snapshot attributes in the Snapshot menu,
which also displays the status of the registers. To access the Snapshot menu,
press the top menu selection button [SNAPSHOT] in the menu control block.
In the Snapshot menu, as well as setting snapshot attributes, you can carry out
editing operations on snapshots, including copy and delete.
For details, see "Snapshot Register Editing" (page 335).
Operations in the Misc >Snapshot menu
For M/E and PGM/PST snapshots only, you can carry out saving, recalling,
applying attributes, and so on using the same menu. (See page 336.)

Selecting a Region or Reference Region in a Menu

During snapshot operations, you can select a region in the menu. This is
convenient for selecting some of the regions assigned to the numeric keypad
control block or changing the reference region.
For details of the operations, see "Selecting by menus" (page 257).

Setting Snapshot Attributes

Applying snapshot attributes
1
In the Snapshot menu, press VF2 'Snapshot' and HF1 'Attribute.'
The Snapshot >Attribute menu appears.
The status area shows the region names, register numbers, and the status
and attributes set.
2
Press the region display in the upper part of the list to display a selection
window, then select the region in the selection window. Selecting multiple
regions is also possible. To select all regions, press [ALL].
3
Press [OK].
Snapshot Operations in the Menus
329