Setting A Format Converter; Setting An Hdr Converter - Sony MLS-X1 User Manual

Setting a Format Converter

You can convert the signal format of an output signal.
You can use a format converter on odd-numbered
outputs.
Setting the conversion format
You can set the signal format of an output signal to
convert by the format converter.
Notes
• Field frequency and frame frequency conversion is not
supported.
• Ancillary data is deleted if a conversion format is
configured that is different from the system format.
The signal formats that can be converted are given below.
System signal format
(frequency)
2160P 2SI
(59.94, 50)
1080P
(59.94, 50)
1080i
(59.94, 50)
1
Open the Home > Setup > System > Output > FC
Format menu (19101.44).
2
Select a tab to switch the target to set.
[Output] tab: Output converter format settings
[Dedicated Out] tab: Dedicated output converter
format settings
3
Select the target output to set.
To select and set multiple outputs, place a check mark
beside the target outputs to set.
To select and set all outputs, place a check mark in the
Select All checkbox.
4
Press the [FC Format] button and select an output
signal format from the pull-down list.

Setting an HDR Converter

You can set the output signal OETF, color space, and
HDR converter for outputs that have color corrector/HDR
converter enabled.
Signal format of output
signal
1080i
1080P
2160P 2SI
720P
1080i
1080P
720P
1080i
For details about each HDR conversion item, see
"Setting HDR" (page 366).
For details about outputs that can be configured with a
color corrector/HDR converter, see "Selecting Outputs
Configurable with a Color Corrector/HDR Converter"
(page 374).
Note
To use the HDR converter function, the MZS-X1750
HDR Converter License (option) is required for each
target box.
1
Open the Home > Setup > System > Output > HDR
Converter menu (19101.46).
The system OETF, color space, and HDR settings are
displayed in [System Settings].
2
Select a tab to switch the target to set.
[Output] tab: Output HDR converter settings
[Dedicated Out] tab: Dedicated output HDR
converter settings
3
Select the target output to set.
To select and set multiple outputs, place a check mark
beside the target outputs to set.
To select and set all outputs, place a check mark in the
Select All checkbox.
4
Press the [Output Signal OETF] button and select an
OETF from the pull-down list.
Select [SDR], [HLG], [PQ], [S-Log3 (HDR)], or
[S-Log3 (Live HDR)].
5
Press the [Color] button and select a color space from
the pull-down list.
Select [BT.709] or [BT.2020].
6
Enable/disable the system settings using the [Follow
System Settings] switch.
On: Enable system settings. Apply the system
settings to the output signal.
Off: Disable system settings. Apply different settings
than the system settings to the output signal.
If the system settings are disabled, press the [Adjust
Details] button and configure the HDR conversion
settings in the [HDR Converter] window.
Note
When multiple outputs are selected, the [Follow
System Settings] switch settings do not change in
unison.
376