Sony MLS-X1 User Manual page 48

Name Description
3rd row • Selects the background A bus signal when
in key/AUX bus delegation mode or key
bus mode.
• Selects the bus signal assigned by the
delegation buttons in the function button
section when in free assign mode.
Selects the utility function when a utility/
shotbox bank is assigned using the
delegation buttons in the function button
section.
• Selects the utility 1 bus signal when in
utility bus mode.
4th row • Selects the background B bus signal when
in key/AUX bus delegation mode or key
bus mode.
• Selects the bus signal assigned by the
delegation buttons in the function button
section when in free assign mode.
Selects the utility function when a utility/
shotbox bank is assigned using the
delegation buttons in the function button
section.
• Selects the utility 2 bus signal when in
utility bus mode.
b Display
The display shows the following information.
• Settings of buttons on the 1st row to 4th row (signal
name, bus name, register name, or function name
assigned to the button)
• Macro register name of macro attachment assigned to
the 1st row to 4th row buttons
When the [SHIFT] button function is set, "SHFT"
appears on the display. When the shifted state is selected,
"SHFT" is displayed highlighted, and the button
information also toggles to show the shifted state display.
Display mode
Six types of display mode can be set according to the
information to display. You can switch the mode using
the [DISP MODE] button assigned to the function button
section. The display can also be subdivided (top and
bottom) to display two pieces of information.
For details, see "Setting the Display" (page 409).
c Cross-point indicators
When lit, these indicate the logical V/K pair color linked
to the logical V/K pair assigned to buttons on the 3rd row.
If a signal cannot be selected, because a signal is not
assigned or the inhibit setting is set, the indicator is not lit.
You can disable the cross-point indicators so that they do
not turn on.
For details, see "Setting the on/off state of cross-point
indicators" (page 409).
d Function button section (assignable buttons)
You can assign functions, such as settings and operations,
of the cross-point button rows in the Home > Setup >
Panel > Module > Button Assign menu (19104.21).
For details about assigning buttons, see "Assigning
Control Panel Buttons" (page 402).
Function name
Row-n Bus:
a) b)
Background A
a) b)
Background B
Row-n Bus:
a) c)
Utility 1
a) c)
Utility 2
Row-n Bus:
a) c)
DME External
Row-n Bus:
a) c)
DME Utility 1
a) c)
DME Utility 2
Row-n Bus:
a) c)
Key 1 to Key 8
d)
Row-n Bus:
a) b)
Edit Preview
Row-n Bus:
a) b)
FM Source 1
a) b)
FM Source 2
Row-n Bus:
DME1 Video to
a) b)
DME4 Video
Row-n Bus:
DME1 Key to
a) b)
DME4 Key
Row-n Bus:
Utility/Shotbox 1 to
a)
Utility/Shotbox 10
c)
Row-n Aux:
a) b)
Aux 1 to Aux 48
Others:
d)
Row-n Xpt Hold
e)
48
Button Description
name
A Assigns background A
B and B buses to the 1st
row to 4th row.
n = 1 to 4
UTIL1 Assigns utility 1 and 2
UTIL2 buses to the 1st row to
4th row.
n = 1 to 4
DME EXT Assigns DME external
video bus to the 1st row
to 4th row.
n = 1 to 4
DME UTIL1 Assigns DME utility 1
DME UTIL2 and 2 buses to the 1st
row to 4th row.
n = 1 to 4
KEY1 to Assigns key 1 to 8
KEY8 buses to the 1st row to
4th row.
n = 1 to 4
EDIT PVW Assigns edit preview
bus to the 1st row to 4th
row.
n = 1 to 4
FMS1 Assigns frame memory
FMS2 source 1 and 2 buses to
the 1st row to 4th row.
n = 1 to 4
DME1V to Assigns DME1 to
DME4V DME4 video buses to
the 1st row to 4th row.
n = 1 to 4
DME1K to Assigns DME1 to
DME4K DME4 key buses to the
1st row to 4th row.
n = 1 to 4
UTIL/ Assigns utility/shotbox
SBOX1 to banks 1 to 10 to the 1st
UTIL/ row to 4th row.
SBOX10 n = 1 to 4
AUX1 to Assigns AUX1 to 48
AUX48 buses to the 1st row to
4th row.
n = 1 to 4
XPT HOLD Sets cross-point hold
for the buses assigned
to the 1st row to 4th
row.
n = 1 to 4