Sony MLS-X1 User Manual page 157

Fringe (radial modulation)
This modulates the pattern in the radial direction.
1
Open the Home > M/E-1 > Bus/Transition > Wipe >
Main Modify menu (11109.35).
2
In the [Modulation] group, select a modulation type.
Set the following parameters.
No. Parameter
1 Amplitude
2 Frequency
3 Speed
4 Shape
a) 1: Sine wave, 2: Triangle wave, 3: Square wave
Warping the edges of a wipe pattern
(Spring)
This warps the edges of a pattern inward or outward.
Spring disabled
1
Open the Home > M/E-1 > Bus/Transition > Wipe >
Main Modify menu (11109.35).
2
Set the [Spring] button to the on state and set the
following parameter.
Adjustment
Amplitude of modulation
Frequency of modulation
Speed of ripples
• Negative values create
waves in the down, left, and
counterclockwise
directions.
• Positive values create
waves in the up, right, and
clockwise directions.
a)
Modulation waveform
Spring enabled
No. Parameter
1 Width
Adding a spiral effect to a wipe pattern
(Spiral)
This transforms the pattern into a spiral pattern.
Spiral disabled
1
Open the Home > M/E-1 > Bus/Transition > Wipe >
Main Modify menu (11109.35).
2
Set the [Spiral] button to the on state and set the
following parameters.
No. Parameter
1 Magnitude
2 Wave Speed
157
Adjustment
Size and direction of the warp
• A value of –100.00
corresponds to maximum
inward warpage.
• A value of +100.00
corresponds to maximum
outward warpage.
Spiral enabled
Adjustment
Size and direction of the
spiral
• A value of –100.00
represents the maximum
movement in the
counterclockwise direction.
• A value of +100.00
represents the maximum
movement in the clockwise
direction.
Speed of the lateral waves
• Negative values set the
speed from the left.
• Positive values set the
speed from the right.