Frame Memory Operations; Assigning A Frame Memory Output; Selecting An Input Signal; Selecting A Frame Memory Output Channel - Sony MLS-X1 User Manual

Notes
• Audio is recorded in video content, even if the video
content is created with audio disabled on a frame
memory output channel. Audio recording cannot be
disabled.
• To play audio, set the signal output to through mode.
For details about through mode, see "Setting Through
Mode" (page 374).
• In variable-speed playback, audio is not played.
• In loop playback, audio fades in at the playback start
point and fades out at the playback stop point. In
reverse playback, audio is not played.
• Noise may occur if a frame memory source bus or
frame memory output cross-point is switched during
audio playback.
• The audio sampling frequency when recording audio is
48 kHz only.
Importing/exporting
Frame memory content can be imported from a computer
using the Home > Content > Import/Export menu. You
can also export multiple content together as an archive
file and import an exported archive file into content
storage.
For details, see "Importing/Exporting Content"
(page 355).
Frame Memory
Operations

Assigning a Frame Memory Output

To output frame memory images to a monitor, for
example, the output signals from frame memory (FM1 to
FM16) must be assigned to cross-point buttons
beforehand.
For details about assignment, see "Creating a Cross-
Point Assign Table" (page 383).

Selecting an Input Signal

You can use the frame memory source 1 bus or 2 bus
signal for the input to frame memory.
Select a signal in a cross-point button row assigned with
the frame memory source 1 bus or 2 bus.
For details about selecting a signal, see "Chapter 4
Selecting Signals" (page 81).
Selecting a Frame Memory Output
Channel
Displaying the frame memory output
channel status
Open the Home > Frame Memory > FM Common >
Channel > Status menu (13109.31).
The status of the frame memory output channels is shown
on the left, and the properties of the content recalled on
the selected frame memory output channel are shown on
the right.
The following information is displayed in the frame
memory output channel status.
• Frame memory output channel
For combined channels, this is displayed in odd-
numbered channel/even-numbered channel format.
• Recalled content thumbnail
"No Thumbnail" is displayed if there is no thumbnail
for the content.
• Name of recalled content
178