Table of Contents
Advertisement
Programming the Options
Setting the Display for 1- or 2-Lines
(for the 8434DX only)
To change the display to 1 or 2 lines (on the 8434DX only)
1. While on-hook, press
2. Press
3. Enter the 2-digit code, ''35'' (''DL'').
4. Press either ''1'' or ''2'' to change the setting:
or
press
then exit programming.
.
Shift
The light next to
Shift
.
Mute
The light next to
Shift
The current setting (1-LINE DISPLAY or 2-LINE DISPLAY) is
shown on the display.
Press ''1'' to select a 1-line display
Press ''2'' to select a 2-line display
∗
to change the setting. Press
After pressing ''1'' or ''2'' or pressing ''#'', one of the following voice
terminal responses occurs:
If the voice terminal saves your selection, the first three
green call appearance lights go on and, if you have a display,
a confirmation message is displayed.
If the voice terminal cannot save this selection, the first three
red call appearance lights go on and, if you have a display, an
error message is displayed. In this case, the selected option
will be in effect until power is removed from the set. If this
happens, try repeating the process. If the option still cannot be
saved, the terminal may be faulty.
goes on.
goes off.
to save the desired option and
#
79
Advertisement
Table of Contents
