Table of Contents
Advertisement
Programming the Options
Enabling/Disabling the Speakerphone
or Speaker (or Changing to a
Listen-Only Speaker)
NOTE:
The 8403 is equipped with a 1-way, listen-only speaker that can be
enabled or disabled; this voice terminal CANNOT be optioned for a 2-way
speakerphone.
To enable or disable the 2-way speakerphone or the listen-only speaker, or
to change the 2-way speakerphone to a 1-way, listen-only speaker
1. While on-hook, press
2. Press
3. Enter the 2-digit code, ''77'' (''SP'').
4. Press one of the following to change the current setting:
or
if the voice terminal has a display, you may choose to press
the setting. Press
programming.
Feature
The light next to
Feature
.
Mute
The light next to
Feature
The red light next to
If the voice terminal has a display, the current setting ( ENABLE
SPEAKERPHONE or ENABLE ONE-WAY SPEAKER or
DISABLE SPEAKER) is shown on the display, if there is one.
Press ''1'' to enable the 2-way speakerphone
(This setting cannot be used with the 8403)
Press ''2'' to enable the 1-way speaker
Press ''3'' to disable the 1-way speaker or the 2-way speakerphone
to save the desired option and then exit
#
After pressing ''1,'' ''2,'' or ''3'' or pressing ''#'', one of the following
voice terminal responses occurs:
If the voice terminal saves your selection, the first three
green call appearance lights go on and, if you have a display,
a confirmation message is displayed.
If the voice terminal cannot save this selection, the first three
red call appearance lights go on and, if you have a display, an
error message is displayed. In this case, the selected option
will be in effect until power is removed from the set. If this
happens, try repeating the process. If the option still cannot be
saved, the terminal may be faulty.
.
or
Shift
or
goes on.
Shift
goes off.
or
Shift
flutters.
Speaker
∗
to change
71
Advertisement
Table of Contents
