Table of Contents
Advertisement
Labeling the Designation Card
For the 8410 and 8411 Voice Terminals
The Call Appearance/Feature Button Designation Card on the 8410 and 8411
voice terminals contains 10 spaces labeled a through j for specifying the
telephone number, extension, or feature assigned to each button.
To label the card, use the instructions under ''How to Label the Blank
Designation Card'' on the next page.
Notes:
On the 8411, you may also label the telephone number card and place it
under the telephone number card cover located beneath the handset.
Also, if the Analog Adjunct connected to the 8411 uses the I2-Channel, the
telephone number of the Analog Adjunct should be written or typed on the
button label next to Button #10 (labeled j).
For the 8434DX Voice Terminal
There are two Call Appearance/Feature Button Designation Cards on the
8434DX voice terminals:
The smaller card contains two columns with five buttons in each column:
the first column is labeled a through e; the second column is labeled f
through j.
The larger card also contains two columns with 12 buttons in each
column. The button labels on this larger card are blank; that is, they are
NOT prelabeled with letters like the smaller card.
The four columns on either the 8434DX voice terminal, totaling 34 button spaces,
can be used for specifying the telephone number, extension, or feature assigned
to each button.
To label the card, use the instructions under ''How to Label the Blank
Designation Card'' on the next page.
34
Advertisement
Table of Contents
