Table of Contents
Advertisement
Programming the Options
Enabling/Disabling the Mute
Function
To enable or disable the Mute function
1. While on-hook, press
2. Press
3. Enter the 2-digit code, ''68'' (''MU'').
4. Press either ''1'' or ''2'' to change the setting:
or
if the voice terminal has a display, press
to save the desired option and then exit programming.
#
72
Feature
The light next to
Feature
.
Mute
The light next to
Feature
The red light next to
Mute
The current setting (ENABLE MUTE BUTTON or DISABLE MUTE
BUTTON) is shown on the display, if there is one.
Press ''1'' to enable the Mute function
Press ''2'' to disable the Mute function
After pressing ''1'' or ''2'' or pressing ''#'', one of the following voice
terminal responses occurs:
If the voice terminal saves your selection, the first three
green call appearance lights go on and, if you have a display,
a confirmation message is displayed.
If the voice terminal cannot save this selection, the first three
red call appearance lights go on and, if you have a display, an
error message is displayed. In this case, the selected option
will be in effect until power is removed from the set. If this
happens, try repeating the process. If the option still cannot be
saved, the terminal may be faulty.
.
or
Shift
or
goes on.
Shift
goes off.
or
Shift
flutters.
∗
to change the setting. Press
Advertisement
Table of Contents
