Table of Contents
Advertisement
Switch Administration
Administering Softkey Features on the
8434DX
On the 8434DX, up to 15 softkey features can be administered on the three
feature option screens (five features on each screen). When the voice terminal is
shipped from the factory, there are 15 features already assigned to the feature
option screens; their feature abbreviations appear on the second line of the
display, such as the following:
If this feature option screen appears on a user's voice terminal display, the user
would press the softkey below LWC in order to activate the Leave Word Calling
feature or press the softkey below AutCB to use the Automatic Callback feature.
When the feature is activated, an arrow (
abbreviation.
NOTE:
With G3V3 and later switches, the system can download BLANK softkey
labels for positions where there are no features administered.
The 15 softkey features on the 8434DX should be administered in the following
manner:
If the 8434DX is connected to a DEFINITY G3V3 switch, administer the
voice terminal as an 8434. In any of these cases (that is, the voice
terminal is connected to a G3V3 switch or later), the system manager may
choose to leave the default softkey features in place (see ''The Default
Softkey Features on the 8434DX'' on the next page) OR select features
from the list of alternative softkey features (see ''Alternate Softkey
Features on the 8434DX''). Administer the softkey features on
''SOFTKEY BUTTON ASSIGNMENTS'' Buttons #1 through 15.
If the 8434DX is connected to a System 75, System 85, DEFINITY G1,
DEFINITY G2, or DEFINITY G3V2 (or earlier), and you want to use the
softkey features, administer the voice terminal as a 7405D + Display
Module and Feature Key Module. (If you administer the voice terminal as
a 7434 or a 7444, you cannot use the softkey features.) Only the default
softkey features can be used. Administer the 15 softkey features on
''FEATURE MODULE BUTTON ASSIGNMENTS'' Buttons #1 through 15.
(The Normal feature should be administered on Button #1 on the
''DISPLAY BUTTON ASSIGNMENTS'' screen.) sp .5 For example, for the
features on the default feature option screen on the previous page, the
Leave Word Calling feature would be administered on ''FEATURE
MODULE BUTTON ASSIGNMENTS'' Button #1; the Automatic Callback
feature would be administered on Button #4.
58
LWC CnLWC Cnslt AutCB Timer
) appears above the feature
Advertisement
Table of Contents
