Removing The Transit Bars From The Weighing System - Miele PW 6163 Operating And Installation Instructions

Fitting the transit
bars

Removing the transit bars from the weighing system

Loosen the nuts on the 4 bolts with an open-end wrench.

Retain the transit bars. The transit bars must be refitted if the machine
is to be transported again.
Install the 4 bolts and 3 nuts each by hand.

Tighten nut 1 with an open-end wrench.

Align nut 2 and 3 tension-free by hand. Tighten the nuts against

each other using an open-end wrench.
Installation
75