Starting A Programme; Displaying Additional Programme Information - Miele PW 6163 Operating And Installation Instructions

Washing
36
Turn the rotary selector until the desired spin speed is set.

Depending on the machine type, the spin speed can be changed in
25 rpm steps from 300 rpm to a maximum of 1025 rpm (PW 6323) or
975 rpm (PW 6243/6163).
Press the rotary selector to confirm the set spin speed.


Starting a programme

When the  button flashes, the programme can be started.
Press the  button.

The door will lock and the wash programme will start.
7 Cottons hygiene
40°C Pre-wash
Main wash
+  
Display after programme start (example)
The programme status will appear in the display.
The current wash programme is shown in the second display line (in
Pre-wash
the upper picture "
temperature appears on the right-hand side (in the upper picture
20 °C
" ").
The third line of the display shows the following wash programme (in
Main wash
the upper picture "
end of the programme is displayed on the right-hand side (in the
12:35
upper picture "

Displaying additional programme information

7 Cottons hygiene
90°C Main wash
Rinse 1
+  
To display additional information about the wash programme, press

the  function button.
7 Cottons hygiene
Start date and time 10.07.2018
Start time: 09:47
Display after pressing the  function button (example 1)
20
Finish at
 
"). Next to it, the current suds
"). Next to it, the estimated time at the
").
60
Cold Finish at
 
°C
12:35

°C
12:35

°C

