Closing top-
hinged door
Position the drum
door on the clean
side
Removing water
from the drum
Starting an
additional spin
programme
First close the lower half of the drum door with the locking device.
Then close the upper half of the drum door until the locking hooks
grip and engage.
It is essential that the top-hinged door on the clean side is closed
again after unloading.
Fold down the top-hinged door on the clean side with both hands
on the door handle.
Push the door handle down.
When the top-hinged door is closed on the clean side, the drum
automatically moves to the unclean side.
Drum locating
The
programme can be used to manually transfer a
laundry item in the drum to the clean side. However, the operator is
responsible for ensuring that the laundry is hygienically safe.
Drum locating
Start the
The drum door is turned from the unclean side to the clean side and
locked.
Finishing cancelled programmes
Carry out the following steps if a wash programme has been
cancelled with water in the drum or during the spin cycle. In this case,
the display messages
Programme finished. Drum still rotating.
When the display message
appears, press the function button. Otherwise, you can skip this
step.
The water drains from the machine.
Separate spin
Selecting the
Press the button.
The washing machine runs the spin programme.
programme.
Programme finished. Water in the drum.
are shown.
Programme finished. Water in the drum.
programme.
Washing
or
39