With Pre-Wash - Miele PW 6163 Operating And Installation Instructions

Filling via the
dispenser
compartment
Adding directly to
the drum

With Pre-wash

For heavily soiled laundry, a Pre-wash can be added before the
programme start in the standard programmes 1 to 10.
Press the + "Block+" button.

The following will appear in the display:
1
Cottons hygiene
Pre-wash
40 °C
Main wash
+  
The "+" field is highlighted in the display.
Useful tip: The function can be deselected by pressing the
+ "Block+" button again.
Starching can be selected in all standard programmes (except Extra
Spin and Extra Drain) before the start of the programme by pressing
the  "Starch stop" button. The  field will be highlighted in the
display.
The function can be deselected by pressing the button again.
1 Cottons hygiene
Prog. stopped. Starch stop pressed.
The door can be opened


If the programme step "Starch stop" is reached, Prog. stopped.
Starch stop pressed. flashes in the display.
Prepare the starch according to the manufacturer's instructions and
add to the inflowing water via the front  dispenser compartment. If
necessary, dilute the starch with water. The wash time will
automatically be increased by 4 minutes.
The programme is continued by pressing the "START" button.
When the "Starch stop" programme stage is reached, open the drum
door and add the starch prepared according to the manufacturer's
instructions. Close the drum door
The following message will appear in the display again:
1 Cottons hygiene
Prog. stopped. Starch stop pressed.
The door can be opened


Press the "START" button and the programme continues.
Additional functions
14,0 / 16,0
kg







45