Amount To Be Dispensed; Commissioning The Dispenser Pumps; Dispenser Calibration - Miele PW 6163 Operating And Installation Instructions

Optional modules (depending on country)
Amount to be
dispensed
Commissioning
the dispenser
pumps
Dispenser
calibration
To go directly to
Dispenser
calibration when
the machine is
switched off:
50
After the programme has started, no detergent will be dispensed via

the dispenser pumps and the following message (for example) will
be displayed:
Cottons hygiene
1
90 °C Main wash
Rinses
+ 

Please follow the detergent manufacturer's instructions.
 Danger of injury!
Strong chemical reactions and material damage.
It is particularly important to observe manufacturer's instructions
when using a combination of cleaning agents and special
application products. Products must only be used for applications
approved by the manufacturer to avoid any material damage or the
occurrence of strong chemical reactions. Confirmation must be
sought from the detergent manufacturer that using the agent in the
washing machine will not cause damage.
Useful tip: Correct dosage also depends on the viscosity of the liquid
agent. It should therefore be allowed to settle to room temperature
before being used.
Before the liquid dispenser pumps can be used, the liquid detergent
must be drawn into the system and the amount to be dispensed set.
Dispenser calibration is used to measure the throughput of the
individual dispenser pumps.
Press and hold multifunction button 2 and switch the machine on

with  "Mains on".

Dispenser calibration

Dispenser pump 1
Dispenser pump 2
Options:
- Dispenser pump 1 to
Select a dispenser pump.

When a dispenser pump is selected, the following will appear in the
display:
Dispenser calibration
V: 100 ml
10,0 / 10,0
1000 rpm

Main menu

13
Dispenser pump 1

t: 0 s P: No

0/1

kg



