Removing The Transit Bars On The Weighing System - Miele PW 6163 Operating And Installation Instructions

Assembling the
transit bars

Removing the transit bars on the weighing system

Loosen the nuts on the 4 screws with an open spanner.

Retain the transit bars. The transit bars will need to be reassembled
should the washing machine ever need to be moved again.
Assemble the 4 screws and their 3 nuts by hand.

Use an open spanner to tighten nut 1.

Adjust nut 2 and 3 without tension by hand. Use an open spanner

to tighten the nuts against each other.
Installation
75