Water Connection - Miele PW 6163 Operating And Installation Instructions

Installation
76

Water connection

To ensure trouble-free operation, a water connection pressure of at
least 100 kPa (1 bar) and a maximum of 1000 kPa (1 bar) is required.
1 2
3
4
5 6
a
Cold water for liquid dispensing
b
Hard water (cold water)
c
Casing side
d
Casing lid
e
Cold water
f
Hot water
The connection to the supply line must be made via a water shut-
off valve. This installation may only be carried out by an approved
installer in compliance with the country-specific regulations and the
regulations of the local water supply company.
The machine must be connected to the water supply using the water
inlet hoses provided.
The hot water supply must not exceed a maximum temperature of
70 °C.
Hoses must be replaced with hoses tested for a burst pressure of at
least 7000 kPa (70 bar) overpressure. The hoses must be suitable for
a water temperature of at least 90 °C. The same requirements also
apply to the integrated connection fittings. Miele original spare parts
meet these requirements.
5