Amount To Be Dispensed; Commissioning The Dispensing Pumps; Dispenser Calibration - Miele PW 6163 Operating And Installation Instructions

Optional modules
Amount to be dis-
pensed
Commissioning
the dispensing
pumps
Dispenser calibra-
tion
To go directly to
Dispenser calibra-
tion when the ma-
chine is switched
off:
50
Whites
1
2 Cottons
Cottons Intensive
3
 
Switch liquid dispensing off manually using the "Dispensing

off" function button.
After the programme has started, no detergent will be dispensed via

the dispensing pumps and the following message (for example) will
be displayed:
1 Cottons hygiene
90 °C Main wash
Rinses
+ 

Please follow the detergent manufacturer's instructions.
 Risk of injury!
Strong chemical reactions and material damage.
It is particularly important to observe manufacturer's instructions
when using a combination of cleaning agents and special applica-
tion products. Products must only be used for applications ap-
proved by the manufacturer to avoid any material damage or the
occurrence of strong chemical reactions. Confirmation must be
sought from the detergent manufacturer that using the agent in the
washing machine will not cause damage.
Tip: Correct dosage also depends on the viscosity of the liquid agent.
It should therefore be allowed to settle to room temperature before
being used.
Before the liquid dispensing pumps can be used the liquid agent
must be drawn into the system and the amount to be dispensed set.
Dispenser calibration is used to measure the throughput of the indi-
vidual dispensing pumps.
Press and hold multifunction button 2 and switch the machine on

with  "Power on".

Dispenser calibration

Dispenser pump 1
Dispenser pump 2
Options:
Dispensing pump 1
-
Select a dispensing pump.

90
°C
60 °C
60
°C


10,0 / 10,0
1000 rpm

Main menu

13
to


kg


