Table of Contents
Advertisement
Starting and Stopping the Engine
SWITCHING AUTOMATIC ENGINE
STOP ON AND OFF
1.
Press Settings on the touchscreen.
2. Press Vehicle Settings.
3. Switch 30min Max Idle on or off.
Note: You cannot permanently switch off
the automatic shutdown. If you switch it off,
it turns on each time you switch the ignition
on.
OVERRIDING AUTOMATIC ENGINE
STOP
Note: You cannot permanently switch off
the automatic engine stop feature. When
you switch it off temporarily, it turns on at
the next ignition cycle.
You can stop the engine shutdown, or reset
the timer, at any point before the
30-second countdown has expired by
doing any of the following:
•
Pressing the brake pedal or accelerator
pedal.
•
Pressing the OK or RESET button
during the countdown.
ACCESSING THE PASSIVE KEY
BACKUP POSITION
If you are unable to start the engine, do the
following:
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
E327286
1.
Open the floor console storage
compartment lid.
2. With the buttons facing upward and
the unlock button facing the front of
your vehicle, place the passive key into
the backup slot.
3. With the key in this position, press the
brake pedal then press the push button
ignition switch to switch the ignition on
and start your vehicle.
STARTING AND STOPPING
THE ENGINE –
TROUBLESHOOTING
STARTING AND STOPPING THE
ENGINE – WARNING LAMPS
Malfunction Indicator Lamp
If it illuminates when the engine
is running, the on-board
diagnostics system is detecting
a malfunction of the vehicle emission
control system.
156
Advertisement
Table of Contents
Troubleshooting
