Accessing The Passive Key Backup Position; Starting And Stopping The Engine - Troubleshooting - Ford TRANSIT 2022 Owner's Manual

Starting and Stopping the Engine
OVERRIDING AUTOMATIC ENGINE
STOP
You can stop the shutdown, or reset the
timer, at any point before the 30-second
countdown has expired by doing any of the
following:
• Pressing the brake or accelerator pedal.
• Pressing the OK or RESET button
during the 30-second countdown.
ACCESSING THE PASSIVE KEY
BACKUP POSITION
If you are unable to start your vehicle,
follow the steps below.
E358751
1. Place the remote control in the
instrument panel slot as shown with
the buttons facing upward.
2. Press and hold the brake pedal.
3. Press the push button start to switch
the power on and start your vehicle.
2022 Transit (TTH) Canada/United States of America, NK3J 19A321 AA enUSA, Edition date: 202107, First-Printing
STARTING AND STOPPING
THE ENGINE –
TROUBLESHOOTING
STARTING AND STOPPING THE
ENGINE – WARNING LAMPS
Malfunction Indicator Lamp
Check Engine
If it illuminates when the engine is running
this indicates a malfunction. The On Board
Diagnostics system has detected a
malfunction of the vehicle emission control
system.
If it flashes, engine misfire may be
occurring. Increased exhaust gas
temperatures could damage the catalytic
converter or other vehicle components.
Avoid heavy acceleration and deceleration
and have your vehicle immediately
serviced.
Powertrain Warning Lamp
If it illuminates when the engine is running
this indicates a malfunction. If it flashes
when you are driving, immediately reduce
the vehicle speed. Avoid heavy
acceleration and deceleration and have
your vehicle immediately serviced.
If both lamps illuminate when the engine
is running, stop your vehicle as soon as it
is safe to do so. Continuing to drive your
vehicle may cause reduced power or the
engine to stop. Switch the ignition off and
attempt to restart the engine. Have your
vehicle immediately checked.
187