Table of Contents
Advertisement
Removable Vehicle Components
15.
Return the hex tool to the tool pouch
and secure it in vehicle.
16.
Return mirrors to the driving position.
Note: When you remove the doors, the rear
seat occupant alert no longer functions.
Installing the Doors
1.
Switch your vehicle off.
2. Fold the mirrors towards the front of
the vehicle before installing the front
doors.
3. Inspect and clean debris from the
bodyside and door hinges.
4. If you are using a storage bag, unzip it
far enough to allow access to the
hinges.
E347604
5. Locate the fender and door protectors
in the tool pouch. Install one over the
fender edge near the upper door hinge
and the other on the door edge near
the bottom door hinge.
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
E347537
6. Locate the lower bodyside hinge and
install alignment pin.
E347540
7.
Locate the upper door hinge portion.
341
Advertisement
Table of Contents
Troubleshooting
