Table of Contents
Advertisement
Hill Descent Control - Manual Transmission
WHAT IS HILL DESCENT
CONTROL
Hill descent control allows the driver to set
and maintain vehicle speed while
descending steep slopes in various surface
conditions.
HOW DOES HILL DESCENT
CONTROL WORK
Hill descent control can maintain vehicle
speeds on downhill slopes between
2–20 mph (3–32 km/h). Above 20 mph
(32 km/h), the system remains on but the
descent speed cannot be set or
maintained.
Note: The system does not function below
2 mph (3 km/h).
The system requires a cool down interval
after a period of sustained use. Hill descent
control provides a warning in the message
center and a tone sounds when the system
is about to disengage for cooling. At this
time, manually apply the brakes as needed
to maintain descent speed.
Note: The amount of time that the system
can remain active before cooling varies with
conditions.
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
HILL DESCENT CONTROL
PRECAUTIONS
WARNING: The system does not
control speed in low traction conditions
or extremely steep slopes. The system
is designed to be an aid and does not
relieve you of your responsibility to drive
with due care and attention. Failure to
follow this instruction could result in
personal injury.
WARNING: The system does not
replace the parking brake. When you
leave your vehicle, always apply the
parking brake.
SWITCHING HILL DESCENT
CONTROL ON AND OFF
Press the button on the center
console. A light in the instrument
E328593
cluster illuminates when the
system is active.
SETTING THE HILL DESCENT
SPEED
To increase or decrease the descent speed,
press the accelerator or brake pedal, or use
the SET + and SET - buttons on the
steering wheel. Once you reach the
preferred speed remove your feet from the
pedals.
HILL DESCENT CONTROL
INDICATOR
Illuminates when you switch hill
descent control on.
E328593
217
Advertisement
Table of Contents
Troubleshooting
