Table of Contents
Advertisement
· Crash sensors and monitoring
system with readiness indicator.
E67017
The seatbelt pretensioners are designed
to tighten the seatbelts when activated. In
frontal and near-frontal crashes, the
seatbelt pretensioners may be activated
alone or, if the crash is of sufficient severity,
together with the front airbags. In side
crashes and rollovers, the pretensioners
will be activated when the Safety Canopy
is activated.
FASTENING AND
UNFASTENING THE
SEATBELTS
All seatbelts in your vehicle are a
three-point combination lap and shoulder
seatbelt.
E338014
A
Seatbelt tongue.
B
Seatbelt buckle.
1.
Pull the seatbelt out steadily.
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
Seatbelts
Note: It may lock if you pull it sharply or if
the vehicle is on a slope.
2. Insert the tongue into the buckle.
3. Pull the seatbelt tight to remove any
slack.
Unfastening the Seatbelts
1.
Press the red button on the buckle to
release the seatbelt.
2. Hold the seatbelt tongue and let it
retract completely and smoothly to its
stowed position.
SENSITIVE LOCKING MODE
WHAT IS SENSITIVE LOCKING
MODE
Sensitive locking mode is a seatbelt
retractor feature that allows shoulder belt
length adjustment according to your
movements and locking in response to
vehicle movement.
HOW DOES SENSITIVE LOCKING
MODE WORK
If the driver suddenly brakes, turns a corner
sharply, or the vehicle receives an impact
of about 5 mph (8 km/h) or more, the
seatbelts lock to help reduce forward
movement of the driver and passengers.
In addition, the seatbelt retractor locks if
you pull the seatbelt webbing out too
quickly. If the retractor does not unlock,
pull the seatbelt out slowly then feed a
small length of webbing back toward the
stowed position.
Note: When driving off-road or at a severe
angle, the seatbelt mechanism locks. It does
not allow you to pull the seatbelt webbing
out until your vehicle is on nearly level
ground.
53
Advertisement
Table of Contents
Troubleshooting
