Ford BRONCO 2021 Owner's Manual page 360

Removable Vehicle Components
E346666
4. Zip the bag fully closed and gently
place the door in the cargo area. Avoid
contacting the rear pillars, speakers,
striker, and trim. For soft tops, take care
to avoid contacting the prop rod.
5. Slide the door into position with the
bag label facing rearward. Center the
door to make sure there is space
between the door and cargo box trim
panels.
6. Push the lower edge of the door
forward until it stops to create space
for the door peak.
7. Secure the door bag to the retention
harness with the clip.
8. Repeat Steps 3-5 for the driver side
front door. Secure the bags using the
clips on the bags.
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
9. Lift the retention harness over the
doors. Make sure the straps are
straight.
10. Secure the upper straps 5 and 6 to
the eyelet bolts and lower straps 7
and 8 to the rear cargo rings.
11. Tighten all adjustable straps to
secure the doors.
12. To prevent the doors from moving,
fold the unused rear door bags to use
as a spacer and place them between
the doors and lower cargo hooks as
shown.
1
E350241
E350274
Note: The doors should not move when
pressure is applied.
356
2 3