Table of Contents
Advertisement
Starting and Stopping the Engine
If it flashes, engine misfire could be
occurring. Increased exhaust gas
temperatures could damage the catalytic
converter or other vehicle components.
Avoid heavy acceleration and deceleration,
and have your vehicle checked as soon as
possible.
STARTING AND STOPPING THE ENGINE – INFORMATION MESSAGES
Message
Cranking Time Exceeded
Starting System Fault
No Key Detected
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
Powertrain Warning Lamp
fault. If it flashes when you are driving,
immediately reduce the vehicle speed.
Avoid heavy acceleration and deceleration,
and have your vehicle checked as soon as
possible.
If both lamps illuminate when the engine
is running, stop your vehicle as soon as it
is safe to do so. Continuing to drive your
vehicle could cause reduced power or the
engine to stop. Switch the ignition off and
attempt to restart the engine. Have your
vehicle checked as soon as possible.
Displays if you exceed the starting time limit. You cannot
attempt to start the engine for 15 minutes. If you cannot start
the engine after 15 minutes passes, have your vehicle imme-
diately checked.
Displays if you are unable to start your vehicle with a correctly
coded key. The system has detected a fault that requires
service. Have your vehicle checked as soon as possible.
Displays if the system does not detect a valid passive key.
157
If it illuminates when the engine
is running, this indicates a
powertrain or four-wheel drive
Action
Advertisement
Table of Contents
Troubleshooting
