Stability Control Indicator - Ford BRONCO 2021 Owner's Manual

Button Func-
tions
Default at start-
up
Button Traction Control
momentarily
pressed - single
press
Button pressed
and held for five
seconds
Button pressed
when Traction
Control Off or
Advance Trac
Off
Note: Do not use the AdvanceTrac Off
setting on public roadways.
If a fault occurs in either the stability
control or the traction control system, you
may experience the following conditions:
• The stability and traction control light
illuminates steadily.
• The stability control and traction
control systems do not enhance your
vehicle's ability to maintain traction of
the wheels.
If a driving condition activates either the
stability control or the traction control
system you may experience the following
conditions
• The stability and traction control light
flashes.
• Your vehicle slows down.
• Reduced engine power.
• A vibration in the brake pedal.
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
Stability Control
ESC Features
Mode Stability Control
Default - Trac- On during bulb
tion Control On
and Normal
Advancetrac
Off
AdvanceTrac
Off
Return to
Default
Electronic
Off Light Stability Control
Enabled
check
On Enabled
On Disabled
Off Enabled
• The brake pedal is stiffer than usual.
• If the driving condition is severe and
your foot is not on the brake, the brake
pedal may move as the system applies
higher brake force.
STABILITY CONTROL
INDICATOR
If it does not illuminate when you
switch the power on, or remains
on, this indicates a malfunction.
E138639
Have your vehicle checked by an
authorized dealer as soon as possible.
206
Traction Control
Systems
Enabled
Disabled
Disabled
Enabled