Table of Contents
Advertisement
Starting and Stopping the Engine
HOW DOES AUTOMATIC ENGINE
STOP WORK
Automatic engine stop turns the engine
off. The ignition also turns off in order to
save battery power. Before the engine
shuts down, a message appears in the
information display showing a timer
counting down. If you do not intervene
within 30 seconds, the engine shuts down.
Another message appears in the
information display to inform you that the
engine has shut down in order to save fuel.
Start your vehicle as you normally do.
SWITCHING AUTOMATIC ENGINE
STOP ON AND OFF
1.
Press the button on the
E386797
touchscreen.
2. Press Vehicle.
3. Switch 30min Max Idle on or off.
Note: You cannot permanently switch off
the automatic shutdown. If you switch it
off, it turns on each time you switch the
ignition on.
OVERRIDING AUTOMATIC ENGINE
STOP
You can stop the engine shutdown, or reset
the timer, at any point before the
30-second countdown has expired by
doing any of the following:
•
Pressing the brake pedal or accelerator
pedal.
•
Pressing the OK or RESET button
during the countdown.
Note: You cannot permanently switch off
the automatic engine shutdown feature.
When you switch it off temporarily, it turns
on at the next ignition cycle.
2024 Ranger (TRD) Canada/United States of America, enUSA, Edition date: 202304, DOM
ACCESSING THE PASSIVE KEY
BACKUP POSITION -
VEHICLES WITH: PUSH
BUTTON START
If you are unable to start your vehicle,
locate the backup slot at the bottom of
the armrest bin.
E362022
Note: Make sure to place the key properly
into the backup slot.
Place the key into the backup slot.
With the key in the backup slot, press the
brake pedal, then press the push button
ignition switch to start your vehicle.
175
Advertisement
Table of Contents
Troubleshooting
