Setup - Crestron TPMC-4SM Installation & Operation Manual

Crestron TPMC-4SM

Setup

Installation & Operations Guide – DOC. 6845F
Network Wiring
When wiring the Ethernet network, consider the following:
•
Use Crestron Certified Wire.
•
Use Crestron power supplies for Crestron equipment.
•
Provide sufficient power to the system.
CAUTION: Insufficient power can lead to unpredictable results or can
cause damage to the equipment. Please use the Crestron Power Calculator
to help calculate how much power is needed for the system
(www.crestron.com/calculators).
Unlike other Crestron network devices, the TPMC-4SM does not use the Cresnet
network for communications between the device and the control system. The TPMC-
4SM requires the use of a high-speed Ethernet connection for control system
communications.
For general information on connecting Ethernet devices in a Crestron system, refer to
the latest version of the Crestron e-Control
6052) at www.crestron.com/manuals.
Identity Code
NOTE: The latest software can be downloaded from www.crestron.com/software.
The IP ID is set within the TPMC-4SM's IP table using Crestron Toolbox™
software. For information on setting an IP table, refer to the Crestron Toolbox
software help file. The IP IDs of multiple TPMC-4SM devices in the same system
must be unique.
When setting the IP ID, consider the following:
•
The IP ID of each unit must match an IP ID specified in the Crestron
®
Studio software or SIMPL Windows program.
•
Each device using IP to communicate with a control system must have a
unique IP ID.
4.3" Room Scheduling Touch Screen

Technology Reference Guide (Doc.
4.3" Room Scheduling Touch Screen: TPMC-4SM • 11
