Crestron DualTouch DTT-15V3 Operation Manual page 19

Crestron DTT-15V3
Install Pen Tether
Kensington Security Slot
Operations Guide – DOC. 6632C
DualTouch
VESA Mounting
Rear of DTT-15V3
CAUTION: When attaching the DTT-15V3 to an alternate mounting
platform, be sure to follow all instructions supplied by the manufacturer.
The pen can be tethered to the DTT-15V3 using the supplied tether and tether
hardware.
1. Use a flat head screwdriver to mount the tether hardware to one of four
tether locations on the back of the DTT-15V3, as shown in the following
illustration.
Tether Locations
TETHER
LOCATIONS
2. Loop the tether through the eyelet on the tether hardware and the eyelet on
the stylus.
The Kensington Security Slot is an industry standard that gives customers the best
option for the physical security of computer and electronic equipment. The security
slot is located on the rear of the DTT-15V3. Refer to the "Hardware Connections for
the DTT-15V3" illustration on page17. To prevent unauthorized removal, attach one
end of a Kensington security cable to this slot and the other end to an immovable
object. Refer to the Kensington Web site for additional details
(www.kensington.com).
DualTouch
®
Technology Touch Screen
Alternate Mounting
Platform
M4 Screws
4 mm wide
0.7 mm pitch
15 mm maximum
length
®
Technology Touch Screen: DTT-15V3 • 15
TETHER
LOCATIONS