Table of Contents
Advertisement
Keep the screw to secure the option card to the computer.
Store the slot cover in case you remove the card later.
3.
Insert the card into the slot with the connector pins pointing
down, as shown below. If you are installing a full-length
card, insert the other end of the card into the appropriate
card guide near the front of the computer.
Firmly push down the card to insert it as far as it will go.
4.
Secure the end of the card to the back of the computer with
the retaining screw.
Removing Option Cards
If you need to remove an option card, reverse the steps outlined
above. Be sure to replace the option slot cover over the empty
slot to ensure proper airflow inside the computer.
Advertisement
Table of Contents
