Setting The Country Code For The First Time - Epson EISA Tower User Manual

The default country code is United States. See the instructions
in the next section to set the appropriate country code. Later, if
you need to change the country code, follow the instructions
under "Changing the Country Code" on page l-10.

Setting the Country Code for the First Time

To run the Change Country Code utility the first time you boot
your computer from the Reference 1 diskette, follow these steps:
1. Insert the Reference 1 diskette in drive A.
2. Turn on your computer or press the
3. After a moment, you see a screen describing the Change
Country Code utility. The screen displays the following
message and prompt:
Current country code
Change country code? (Y/N)
If you want to select the default country code, United States,
press [Nl. You see a message telling you that the program
still must update your files. Then the program copies the
files. Go to step 4.
If you want to select another country code, press m. You see
the following:
P r e s s F 1 - U S V e r s i o n ( U n i t e d S t a t e s )
P r e s s F 2 - UK Version (United Kingdom)
Press F3 - FR Version (French)
Press F4 - GR Version (German)
Press F5 - IT Version (Italian)
Press F6 - SP Version (Spanish)
Press any other key to accept the
c u r r e n t c o u n t r y c o d e .
Setting Up Your System
1-8
RESET
button.
is United States.