Table of Contents
Advertisement
Press the appropriate function key for your country. The
program copies the files and displays a message confirming
the change.
4.
When you see the following message, press any key to reboot
the system and run the System Configuration program:
you
N
OW
the appropriate AUTOEXEC.BAT
CONFIG.SYS files and start the System
Configuration program.
Press any key to reboot . . .
After a moment, you see the System Configuration program
title screen. If you want to run that program now, see the
information in Chapter 2 before you begin.
If you do not want to configure your computer now, remove
the diskette from drive A and turn off your computer.
The AUTOEXEC.BAT and CONFIG.SYS files on your
Reference 1 diskette are now customized for your country's
keyboard and configuration information. Whenever you boot
your system from the Reference 1 diskette, the computer runs
the appropriate files for your country.
Also, when you run the System Configuration program, the
format of the date and time in your computer's real-time clock
will be set to the appropriate format for your country.
should
reboot
system to r u n
the
and
Setting Up Your System
1-9.
Advertisement
Table of Contents
