Table of Contents
Advertisement
4.
When you see the following message, press any key to reboot
the system and run the System Configuration program:
Now you should reboot the system to run
the appropriate AUTOEXEC.BAT
CONFIG.SYS files and start the System
Configuration program.
Press any key to reboot . . .
After a moment, you see the System Configuration title screen.
If you want to run that program now, see Chapter 2 for
instructions.
If you do not want to run System Configuration, remove the
Reference 1 diskette from drive A and turn off your
computer.
The AUTOEXEC.BAT and CONFIG.SYS files on your
Reference 1 diskette are now customized for the country you
selected.
Also, when you run the System Configuration program, the
format of the date and time in your computer's real-time clock
will be set to the appropriate format for the country you
selected.
and
Setting Up Your System
1-11
Advertisement
Table of Contents
