Table of Contents
Advertisement
Removing the Cover
You must remove the computer's cover if you need to do any of
the following:
Install or remove option cards
Install or remove single inline memory modules (SIMMs)
Remove the processor board to access its components
Install or remove disk drives or other storage devices.
It is best to remove the cover and perform these procedures
while the computer is lying on its side. Follow these steps:
1.
Retract the stabilizing foot on the right side of the computer.
(See Chapter 3 for instructions.)
2.
Lay the computer down on its right side so that the left side
is facing up and the back panel is facing you.
3.
If necessary, unlock the computer's cover. (See Chapter 3 for
instructions.)
4.
Remove the four screws securing the cover to the computer.
Accessing Internal Components
4-3
Advertisement
Table of Contents
