Table 11-1: Ip Separation And Es/4411S Port Allotment - Nortel Media Gateway 3500 Installation, Operation And Maintenance Manual

step:
Connect to the ports on the ES/4411 RTM according to your OAM, Control and
Management IP Separation configuration. (Refer to the table below.)
When connecting the fiber optic cables to port 25, be sure to make a crossover
connection between the TX and RX.
While connecting the cables, be sure to thread them using the Customers'
exterior cable management guides.
Connection to the IP network is established.

Table 11-1: IP Separation and ES/4411s Port Allotment

IP Interface Separation
One IP Interface
Two IP Interfaces
Two IP Interfaces
Three IP Interfaces
* Port 25 is located on the ES/4411 board front panel and Fiber Optic cables are
used. All other ports are located on the ES/4411 RTM (Lim) and CAT5 copper
cables are used.
Installation, Operation, Maintenance Manual
OAM/Control/Media
OAM/Control
Media
OAM
Control/Media
OAM
Control
Media
102
Media Gateway 3500
Port Allotment
25*
20
25*
20
25*
20
22
25*
Document # LTRT-90704