Important Safety Instructions - Epson Stylus Photo RX600 User Manual

Important Safety Instructions

Before using your Stylus Photo RX600, read and follow these safety instructions:
Be sure to follow all warnings and instructions marked on the
Stylus Photo RX600.
Use only the type of power source indicated on the Stylus Photo RX600 label.
Connect all equipment to properly grounded power outlets. Avoid using
outlets on the same circuit as air control systems or other high-load devices
that regularly switch on and off.
Place the Stylus Photo RX600 near a wall outlet where the plug can be easily
unplugged.
Do not let the power cord become damaged or frayed.
If you use an extension cord with the Stylus Photo RX600, make sure the total
ampere rating of the devices plugged into the extension cord does not exceed
the cord's ampere rating. Also, make sure the total ampere rating of all devices
plugged into the wall outlet does not exceed the wall outlet's ampere rating.
Avoid electrical outlets controlled by wall switches or automatic timers.
Keep your Stylus Photo RX600 and computer system away from potential
sources of electromagnetic interference, such as loudspeakers or cordless
telephone base units.
Avoid locations that are subject to rapid changes in heat or humidity, shocks
or vibrations, or dust.
Leave enough room around the Stylus Photo RX600 for sufficient ventilation.
Do not place the Stylus Photo RX600 near a radiator or heating vent or in
direct sunlight.
Place the Stylus Photo RX600 on a flat, stable surface that extends beyond its
base in all directions. It will not operate properly if it is tilted or at an angle.
Leave enough space in front of the Stylus Photo RX600 (at least 9 inches) so it
doesn't tip forward and fall off of the work surface.
Turn off and unplug the Stylus Photo RX600 before cleaning. Clean with a
damp cloth only. Do not spill liquid on it.
160
Requirements and Notices