Saving Photos To A Cd Or Zip Disk - Epson Stylus Photo RX600 User Manual

2. Turn on the Stylus Photo RX600 and your storage device. After a moment,
the Stylus Photo RX600 reads and counts the number of photos on your
device. When it's done, your images are available for printing.
See "Printing From a Memory Card" on page 86 for printing instructions.
Note:
If you've backed up your images on a Zip disk, CD, or other storage device (see
below), they're stored in folders (001, 002, etc.). Use the u and d buttons on the
front of the Stylus Photo RX600 to highlight the folder you want to open, then
press OK to open it.

Saving Photos to a CD or Zip Disk

You can save image files from your camera's memory card to a Zip disk or
CD-R/RW using only the Stylus Photo RX600. This lets you delete the images on
your memory card and reuse it without losing your original images. Once your
images are stored on a disk or CD, you can retrieve them at any time for printing.
To save images, you need a 100MB or 250MB Iomega Zip drive or CD-R/RW
drive (with a USB connection), available at many computer stores. The drive must
provide its own power. We recommend using USB 2.0-compatible (high-speed)
CD-R/RW drives.
Note:
If you insert a Macintosh disk into a Zip drive attached to the Stylus Photo RX600, it
automatically formats it, so be sure to use a disk that is empty or not formatted, or one
containing data you don't mind losing. (You are prompted before any data is erased.)
1. Make sure the Stylus Photo RX600 is turned on and the memory card
containing your photos is inserted in it.
2. If the Stylus Photo RX600 is connected to your computer, unplug the USB
cable that connects it to your computer, or turn off your computer.
122
Printing From Other Devices