Aligning The Print Head - Epson Stylus Photo RX600 User Manual

Aligning the Print Head

If your printouts look grainy or vertical lines appear jagged, you may need to align
the print head.
Note:
You can run a print head alignment using the printer software. Click the ? or Help button
on your printer settings window for instructions on running a print head alignment.
1. Make sure the Stylus Photo RX600 is turned on and not printing, and the
error light is off.
!
2. Load several sheets of plain letter-size paper.
3. Press the
to select
4. Press the
5. On the test page, select the pattern with the two vertical lines most precisely
printed on top of each other. You may need to use a magnifying glass or loupe.
.
6. Select one pattern each for rows 1 through 4. Select the number of the best
pattern for each row by pressing the l and r buttons.
7. Press the
136
Maintaining the RX600
button to enter setup mode, then press the u and d buttons
Setup
Head Alignment
button, then press
OK
button.
OK
.
again to print an alignment pattern.
OK