Printing From A Cd Drive Or Zip Disk - Epson Stylus Photo RX600 User Manual

Printing From a CD Drive or Zip Disk

If you have one of the following devices, you can print from it to your Stylus
Photo RX600 using a USB cable:
USB CD/DVD burners and drives (see http://support.epson.com for a list of
compatible drives); USB 2.0 (high-speed) drives are recommended
100MB or 250MB Iomega Zip drives with an external power adapter
Note:
If your drive is not compatible with the Stylus Photo RX600, you'll see a message
saying that the connected device cannot be used. Epson cannot guarantee the
compatibility of any drives.
If you are using a Zip disk, it must be formatted as a FAT16 disk. Also, if you
insert a Macintosh disk into a Zip drive attached to the Stylus Photo RX600, it
automatically formats it, so be sure to use a disk that is empty or not formatted, or
one containing data you don't mind losing. (You are prompted before any data is
erased.)
Tip:
When you connect a CD-ROM drive, you can also print photos from Picture CDs that
you get from your photo lab.
Follow these steps to connect your storage device:
1. Connect the USB cable from your storage device to the
the front of the Stylus Photo RX600.
EXT/IF USB
port
Printing From a CD Drive or Zip Disk
USB port on
EXT I/F
121